Quick Answer: Why does my trolling motor plug have 3 wires?

Which wire is positive on trolling motor?

The positive leads of a 12v trolling motor system (usually trolling motors with 55lbs of thrust or less) will attach to the positive battery terminal, while the negative lead will attach to the negative terminal.

What is orange wire on trolling motor?

The red wire is wired to the + terminal of battery #2. You have a jumper wire that is connected alos to the + terminal of battery #2 as well as to the – terminal of battery #1. Finally, the orange wire is connected to the + terminal of battery #1. Now at the trolling motor end.

How many wires does a 24 volt trolling motor have?

24 Volt Systems (2 Batteries)

Wire in series only as directed in wiring diagram, to provide 24 volts. Connect a connector cable to the positive (+) terminal of battery 1 and to the negative (-) terminal of battery 2. The jumper wire used should be one size larger than the Trolling Motor lead wire.

Why does my trolling motor have 4 wires?

To make charging easier, the 4 prong/4 wire system became standard on several bassboats. This, in effect, moved the 4 battery post up to the boat side of the plug and configured them in such a way as the two negatives were side by side and the two positives were side by side.

THIS IS IMPORTANT:  Frequent question: What pillar is the first vehicle roof support pillar?

What is the white wire on a trolling motor?

Re: motorguide battery wiring (Catt)

You have a 12/24V trolling motor. The Black wire is the negative for 12 and 24 volts. The Red/White is positive for 12 volts.

How do you wire a 24 volt trolling motor plug?

Feed the wires through the plug housing. On the 12-24V trolling motor plug, connect the positive 24V wire to the terminal marked “24”, the 12V wire to the terminal marked “12” and the negative wire to the terminal marked “-”. On straight 24V trolling motors, connect the two wires to “24” and “-” as appropriate.

How do I know if my trolling motor is 12 or 24 volt?

The nameplates are most often found in the foot petals of the motor. Otherwise, you can look at the configuration of the trolling motor batteries to find the volts. Open the hood and look at the battery. If you see 6 cells, it’s a 12-volt battery, but if you see 12 cells, it means it’s a 24-volt battery.

Can you run a 24 volt trolling motor on 12 volts?

Either go 12 volt or add another battery and run the rated 24 volt. It wont hurt your motor. Most newer ones will not even turn over because the circuit board senses less than 22 volts (dead 24v system). Old ones will turn over but you will have half power.