Question: Will a 302 bolt fit a 4 0 transmission?

Will a 302 bolt fit a 4.6 transmission?

No this will not work. Your 4.6 is a modular engine and the 5.0 is the older ford small block. Bell housing is different. The 4.2 v6 however does share bell housings with the 5.0.

What transmission goes with a 302?

For years, the Ford C-4 automatic was a reliable three-speed automatic transmission for many Ford products, and is fine for most 289, 302 or 351 engines that have received modest modifications.

Will a 302 bolt up to a C6 transmission?

If the transmission is out of a vehicle with a 460 (7.5 Liter) big block, it will not bolt up to a 302. If you are going to get a C6 it needs to be for a small block (302 or 351) and it needs to be a two-wheel drive model, a four-wheel drive model will not work with your 4×2.

Will a T5 bolt up to a 302?

An Deluxe T5 Transmission Conversion Kit will retrofit your 1969 Mustang with a 289, 302 or 351 engine. In order to accomplish the conversion, the kit utilizes late model bellhousing and cable linkage.

Will a 4R70W fit a 302?

Bronco Guru

– A 4R70W or AODE from behind any 5.0 (302) or V6 3.8L Mustang or V6 4.2L F150 will bolt up/work behind any 289/302/5.0/351W/351C/5.8L.

THIS IS IMPORTANT:  Should I replace my car stereo?

Which is better C4 or C6 transmission?

The C4 transmission was primarily used in cars. The C6 transmission could handle more power. Due to the ability to handle more power, the C6 transmission was used in many Ford trucks with bigger engines, and in larger cars that were manufactured with bigger engines.

Will a 351 Windsor fit a 302 transmission?

A 302 and a 351 are almost interchangeable. All sorts of parts, such as heads, cam, lifters, timing chains, timing chain covers, water pumps, engine mounts, and so on, are included. In bellhousing bolt patterns, all trannies bolt to a 302, so 351 is the same as 302.

What engines bolt to a C6 transmission?

Making it the perfect transmission for Ford to pair with their 351W, 351C, 428, 429, 460, and 462 gasoline V8’s. Along with the 7.3L diesel.

Does a C6 fit a 302?

A c6 will fit but you need one with the smallblock bellhousing pattern FE pattern is different. A 302 should do fine put a mild cam in it a 4 bbl intake and a good set of headers.

Is a C6 transmission a 4 speed?

Transmission Types

The C6 is a non-electronic, three-speed transmission. The AOD features a four-speed, non-electronic transmission. It was not until 1992 that Ford introduced the electronic version of the AOD, the AODE.

Are all T5 transmissions the same?

While there are numerous configurations of the T5, because of the large quantities of T5’s produced, many parts are interchangeable. There are now over 200 different T5 transmission assembly part numbers and almost as many ways to customize them to fit just about anything whether passenger car or light duty truck.

THIS IS IMPORTANT:  Quick Answer: How do you know if you have a dead cell in your car battery?

Will a T5 transmission fit a 289?

Hi Dave, Your T-5 & bellhousing will fit right onto your 67 289. You’ll need a 28oz 157 tooth flywheel. I have everything you’ll need in stock, even in aluminum.